TEAMGROUP MP44L 500GB NVMe SSD – PCIe 4.0, 5000MB/s Read, Graphene Cooling

Description
Warranty Information

Description

TEAMGROUP MP44L 500GB M.2 NVMe SSD – PCIe Gen4 Performance with Graphene Heat Dissipation

The TEAMGROUP MP44L 500GB M.2 NVMe SSD (TM8FPK500G0C101) is a high-performance internal solid state drive designed to accelerate everyday computing, improve system responsiveness and provide fast storage for compatible desktop PCs and laptops. Featuring a PCIe Gen4 x4 interface, NVMe technology, sequential read speeds up to 5,000MB/s and write speeds up to 2,500MB/s, it offers a practical upgrade for modern computers requiring reliable, high-speed storage.

With its compact M.2 2280 form factor and innovative graphene heat-dissipating label, the TEAMGROUP MP44L combines fast data access with a slim design suitable for many desktop motherboards, laptops and compact PC systems. The drive also features SLC caching, LDPC error correction, TRIM support and S.M.A.R.T. monitoring technology to help maintain dependable everyday performance.

Whether you are upgrading from a traditional hard disk drive, replacing an older SATA SSD, building a new gaming PC or expanding storage in a compatible laptop, the MP44L 500GB delivers the advantages of modern NVMe storage without requiring a conventional 2.5-inch drive bay or SATA data cables.

Quick answer: The TEAMGROUP MP44L 500GB is a PCIe 4.0 x4 NVMe SSD with an M.2 2280 form factor, up to 5,000MB/s sequential read speed, up to 2,500MB/s sequential write speed and an ultra-thin graphene heat-dissipating label. It is designed for computers with compatible M.2 PCIe NVMe slots and is suitable for Windows, applications, PC gaming and general-purpose internal storage.

Key Features of the TEAMGROUP MP44L 500GB SSD

500GB storage capacity: Practical internal storage for operating systems, applications, documents, frequently used games and personal files.
Up to 5,000MB/s sequential read speed: Helps accelerate file access, application loading and large sequential data transfers.
Up to 2,500MB/s sequential write speed: Supports fast everyday saving, copying and installing of files and software.
PCIe Gen4 x4 interface: High-bandwidth connection designed for compatible modern desktop and laptop motherboards.
NVMe storage technology: Enables efficient communication between the SSD and the host computer.
M.2 2280 form factor: Compact 80mm x 22mm internal drive suitable for supported M.2 NVMe slots.
Graphene heat-dissipating label: Ultra-thin thermal design developed to help spread heat without the bulk of a conventional SSD heatsink.
SLC caching technology: Helps accelerate supported write operations and improve responsiveness during everyday workloads.
LDPC error correction: Supports data integrity and reliable flash memory operation.
TRIM support: Helps maintain SSD storage management and long-term performance on supported operating systems.
S.M.A.R.T. monitoring: Enables monitoring of supported drive health information using compatible software.
DRAM-less architecture: Designed without a dedicated onboard DRAM cache.
Compact and lightweight: Approximately 7g with dimensions of 80 x 22 x 2.25mm.
5-year limited manufacturer warranty: Subject to TEAMGROUP's warranty conditions and endurance limits.
Manufacturer part number: TM8FPK500G0C101.

PCIe Gen4 x4 NVMe Technology for Faster Computer Performance

The TEAMGROUP MP44L uses a PCI Express 4.0 x4 connection, allowing high-speed communication between the SSD and a compatible motherboard.

Compared with older mechanical hard drives, NVMe SSDs offer much faster access to stored information and eliminate the delays associated with moving mechanical components.

For users upgrading from an older SATA SSD, the MP44L also offers considerably higher rated sequential transfer speeds, although real-world improvements depend on the applications and workloads being used.

Up to 5,000MB/s Sequential Read Speed

The 500GB MP44L supports manufacturer-rated sequential read speeds up to 5,000MB/s, helping compatible systems access large files and stored application data quickly.

This can benefit Windows start-up, software loading, selected game-loading operations and the transfer of large files from suitably fast storage sources.

Sequential read performance is especially relevant when accessing large continuous files, while everyday responsiveness also depends on random access performance and the computer's overall configuration.

Up to 2,500MB/s Sequential Write Speed

With write speeds up to 2,500MB/s, the MP44L 500GB is designed to handle software installation, file saving, document storage and everyday data transfers.

Its SLC caching technology helps accelerate supported writing workloads, particularly when sufficient cache space is available.

Performance note: These speeds are maximum manufacturer-rated benchmark figures. Actual results depend on PCIe generation, CPU and motherboard configuration, file size, available storage space, temperature and workload. Sustained write performance may decrease after the available SLC cache is exhausted.

Improve Windows Boot Times and Everyday PC Responsiveness

Upgrading from a traditional mechanical hard drive to the TEAMGROUP MP44L can make a noticeable difference to how quickly a compatible computer responds during everyday use.

Because the SSD accesses data electronically rather than relying on spinning disks, it can retrieve system files and application data with much lower storage access latency than a conventional HDD.

Faster Windows Start-Up and Software Loading

When configured as the operating system drive, the MP44L can help reduce storage-related delays during Windows start-up and application loading compared with a traditional hard drive.

Common activities that may benefit include:

Starting Windows and accessing desktop applications.
Opening web browsers and productivity programmes.
Launching photo editing and creative applications.
Installing and updating supported software.
Loading files, documents and project folders.
Managing multiple applications during everyday work.

The improvement will vary depending on the storage device being replaced, CPU performance, installed memory and operating system condition.

Practical SSD Upgrade for Older Computers

For a desktop or laptop currently using a conventional HDD, installing a compatible NVMe SSD can be one of the most effective ways to improve storage responsiveness.

The MP44L also offers an upgrade path for users with older PCIe NVMe drives who want a larger or newer storage solution.

However, the computer must have a compatible M.2 PCIe NVMe connection. A laptop with only a 2.5-inch SATA drive bay cannot accept the MP44L directly.

TEAMGROUP MP44L 500GB for PC Gaming

The MP44L 500GB is suitable for gaming PCs that need fast internal SSD storage for Windows, game launchers and a selection of installed games.

Modern PC games can contain large textures, environments and other data files that benefit from fast storage access during loading and level transitions.

Faster Game Loading Compared with Mechanical Hard Drives

Installing PC games on an NVMe SSD can reduce loading times compared with a traditional HDD, particularly in titles that frequently access large quantities of game data.

The MP44L provides PCIe 4.0 performance for compatible gaming desktops and laptops, helping reduce storage-related waiting times when opening games and loading supported content.

Important: An SSD does not directly increase graphics card rendering performance or guarantee higher frame rates. Actual game performance also depends on the CPU, GPU, memory and game engine.

500GB Storage for Your Favourite Games

With 500GB of manufacturer-rated capacity, the MP44L is a practical choice for a Windows installation, productivity applications and a smaller collection of frequently played games.

Because some modern games require substantial storage space, users with extensive game libraries may prefer a 1TB or 2TB SSD.

The MP44L 500GB can also be used as a secondary drive in a compatible gaming PC, allowing users to separate selected applications and games from their primary storage device.

Graphene Heat-Dissipating Label for Compact SSD Cooling

One of the distinctive features of the TEAMGROUP MP44L is its heat-dissipating graphene SSD label.

TEAMGROUP developed this thin thermal label to help spread heat generated during SSD operation while preserving the compact M.2 form factor.

Ultra-Thin Graphene Thermal Design

The MP44L features a conductive graphene-based thermal label with a low-profile design. Unlike a large conventional SSD heatsink, the label adds minimal thickness to the storage module.

This makes the drive particularly useful in computers where the available M.2 installation space is limited, including certain laptops, compact desktops and motherboards with their own M.2 covers.

Its thin design can also make installation simpler in supported systems that already include a compatible motherboard SSD heatsink.

Can the MP44L Be Used with a Motherboard M.2 Heatsink?

Yes. The MP44L's slim graphene label is designed to work with suitable motherboard M.2 cooling solutions, subject to the motherboard manufacturer's installation requirements.

When using a motherboard heatsink, follow the manufacturer's thermal pad and SSD installation instructions.

Do not assume that the graphene label provides the same cooling capability as a large dedicated metal heatsink. Actual SSD temperatures depend on airflow, system design, workload and surrounding component temperatures.

Cooling note: The graphene label is an integrated thermal feature, not a replacement for all other cooling requirements. Adequate ventilation and suitable thermal management remain important during demanding workloads.

SLC Caching and DRAM-Less Architecture

The TEAMGROUP MP44L uses a DRAM-less storage architecture combined with SLC caching technology to support responsive everyday operation.

What Is SLC Caching?

SLC caching allows part of the SSD's flash memory to temporarily operate in a faster storage mode during supported write operations.

This can improve performance for activities such as copying files, installing software and saving data, especially when transfers fit within the available cache.

As with other SSDs using SLC caching, write speeds can decrease during long, continuous transfers once the cache is exhausted or when the drive is nearly full.

Does the TEAMGROUP MP44L 500GB Have DRAM?

No. TEAMGROUP officially lists the MP44L 500GB as having no dedicated DRAM cache.

This architecture is intended to balance storage performance with manufacturing cost and efficiency, making the drive suitable for mainstream PC upgrades and everyday computing.

Users carrying out very heavy sustained writing workloads, such as frequent large-scale video transfers or specialist workstation tasks, may benefit from considering a higher-performance SSD designed for those requirements.

LDPC Error Correction, TRIM and S.M.A.R.T. Monitoring

In addition to its sequential transfer performance, the MP44L incorporates storage-management and data-integrity technologies designed to support dependable everyday operation.

LDPC Error Correction for Data Integrity

The MP44L supports Low-Density Parity-Check (LDPC) error correction, which helps detect and correct certain errors encountered when reading information from flash memory.

This technology contributes to the reliability of stored data and supports effective flash memory operation over time.

TRIM Support for SSD Maintenance

TRIM allows compatible operating systems to inform the SSD when data blocks are no longer in use.

This helps the drive manage flash storage efficiently and can support more consistent performance over time.

S.M.A.R.T. Drive Health Monitoring

The MP44L supports S.M.A.R.T. monitoring, allowing users to check supported drive health information with compatible diagnostic utilities.

TEAMGROUP also provides its own SSD monitoring software, which can help users inspect available drive status and performance information.

Data protection note: Error correction and drive monitoring do not prevent every form of storage failure. Important files should always be backed up to a separate drive or reliable backup service.

500GB Storage Capacity for Windows, Applications and Files

The TEAMGROUP MP44L offers 500GB of manufacturer-rated storage capacity, making it suitable for a primary operating system drive or additional internal storage in a compatible computer.

Common storage applications include:

Windows 10 or Windows 11 installations.
Office applications and productivity software.
Frequently played PC games.
Photographs and personal document collections.
Software development tools and project files.
Everyday downloads, installers and temporary files.
Secondary SSD storage in compatible desktop PCs.

How Much Usable Space Does a 500GB SSD Provide?

The manufacturer rates this drive at 500GB using decimal storage measurements.

Windows may display approximately 465GB when using binary-based capacity calculations, before accounting for formatting, system partitions and installed software.

This difference is normal and does not indicate that storage capacity is missing.

Is 500GB Enough for a Gaming or Work PC?

A 500GB NVMe SSD can be sufficient for Windows, common applications and a selection of games or personal files.

However, users storing large modern games, substantial media libraries, 4K video projects or virtual machines may benefit from higher-capacity storage.

For everyday home, student and office computing, 500GB remains a practical capacity when combined with appropriate file management and backup practices.

M.2 2280 Compatibility with Desktop PCs and Laptops

The TEAMGROUP MP44L uses the M.2 2280 form factor, measuring approximately 80mm long and 22mm wide.

It connects directly to a suitable PCIe NVMe M.2 motherboard slot, removing the need for a separate SATA data cable and conventional SATA power connector.

Check Your Computer's M.2 NVMe Slot Before Buying

Before ordering, verify that your computer supports an M.2 2280 PCIe NVMe SSD.

M.2 slot: The motherboard or laptop must have an M.2 connection supporting PCIe NVMe storage.
Drive length: The device must support an 80mm-long M.2 2280 module.
PCIe compatibility: PCIe 4.0 provides the intended interface performance, subject to available lanes and system hardware.
BIOS / UEFI: Check the computer manufacturer's storage compatibility and firmware requirements.
Boot support: If using the MP44L as an operating system drive, confirm NVMe boot support.
Physical clearance: Check available space and M.2 cooling arrangements, particularly in laptops and compact PCs.

Important: The MP44L is a PCIe NVMe SSD. It is not compatible with an M.2 slot that supports SATA storage only.

Can the MP44L Work in a PCIe Gen3 M.2 Slot?

Yes, PCIe Gen4 NVMe SSDs can generally operate in backwards-compatible PCIe Gen3 NVMe slots, provided the host supports the drive and correct form factor.

However, the SSD will be limited by the available PCIe Gen3 connection bandwidth and may not reach its full advertised Gen4 transfer speeds.

Can the MP44L Work in a PCIe Gen5 M.2 Slot?

A compatible PCIe Gen5 M.2 NVMe slot can generally operate with a PCIe Gen4 SSD.

The MP44L will continue to function as a PCIe Gen4 device, so installing it in a faster slot does not increase its manufacturer-rated maximum speeds.

Windows and Linux System Compatibility

TEAMGROUP lists compatibility with supported Intel and AMD computer platforms running Windows or Linux, provided that the system hardware supports the necessary PCIe NVMe storage interface.

Windows 10 and Windows 11

The MP44L can be used as a primary or secondary storage drive in compatible Windows 10 and Windows 11 computers.

It is suitable for operating system installation, software storage, PC gaming and general file management.

Linux Computers

TEAMGROUP lists Linux kernel 2.6.33 or later among the supported operating system requirements.

Actual compatibility depends on the computer, NVMe support, firmware, operating system distribution and storage configuration.

Mac Compatibility

Compatibility with Apple Mac computers is not specifically guaranteed in TEAMGROUP's published platform requirements.

Mac users should verify the exact computer model, SSD interface, physical dimensions and any required storage adapter before considering installation.

Many Apple computers do not provide a standard user-replaceable M.2 NVMe slot.

Is the TEAMGROUP MP44L 500GB Suitable for PlayStation 5?

Although the MP44L uses a PCIe Gen4 x4 NVMe interface and M.2 2280 form factor, it is primarily recommended here for compatible desktop and laptop PCs.

Sony recommends an M.2 SSD with sequential read speeds of at least 5,500MB/s for PS5 expansion storage and requires an appropriate heat-dissipation solution.

The MP44L 500GB is rated at up to 5,000MB/s, below Sony's recommended read speed. Its thin graphene label should not automatically be treated as equivalent to the cooling structure specified for PS5 installations.

Recommendation: For PlayStation 5 expansion, choose an SSD that meets Sony's recommended performance, cooling and physical compatibility requirements.

Who Is the TEAMGROUP MP44L 500GB Best For?

Desktop PC builders: Users assembling a modern AMD or Intel system with compatible M.2 NVMe storage.
Gaming PC users: Customers looking for fast internal storage for Windows, game launchers and frequently played titles.
Laptop owners: Users upgrading or replacing an existing compatible M.2 2280 NVMe drive.
Students: Users needing responsive storage for coursework, online learning, applications and documents.
Home users: People wanting faster everyday storage compared with traditional mechanical HDDs.
Office professionals: Users working with documents, spreadsheets, presentations and general productivity programmes.
Small-form-factor PC builders: Customers requiring a compact, low-profile M.2 SSD.
PC upgrade enthusiasts: Users replacing an older SATA SSD or PCIe NVMe drive with a compatible Gen4 model.

Who Should Consider a Different SSD?

The TEAMGROUP MP44L is designed for mainstream PCIe Gen4 storage and may not meet every computer user's requirements.

Computers with SATA-only storage: The MP44L requires a compatible PCIe NVMe M.2 slot.
Devices requiring M.2 2230 or 2242 drives: This model uses the longer M.2 2280 form factor.
Users with very large game libraries: A 1TB or 2TB drive may provide more convenient storage capacity.
Heavy professional write workloads: A higher-end SSD may offer better sustained write performance and workload suitability.
Users specifically requiring dedicated DRAM: TEAMGROUP lists the MP44L as a DRAM-less SSD.
PS5 owners wanting a drive meeting Sony's recommended specifications: Consider a compatible SSD rated at 5,500MB/s or faster with the required cooling solution.
Users seeking maximum PCIe Gen5 performance: The MP44L is a PCIe Gen4 SSD and does not provide Gen5 transfer speeds.

TEAMGROUP MP44L 500GB NVMe SSD Technical Overview

Brand: TEAMGROUP
Product Series: MP44L
Manufacturer Part Number: TM8FPK500G0C101
Memox SKU: SSD-500TEMP44LP
Storage Capacity: 500GB
Product Type: Internal solid state drive (SSD)
Form Factor: M.2 2280
Interface: PCI Express 4.0 x4
Storage Technology: NVMe SSD
Maximum Sequential Read: Up to 5,000MB/s
Maximum Sequential Write: Up to 2,500MB/s
4K Random Read: Up to 440,000 IOPS
4K Random Write: Up to 545,000 IOPS
DRAM Cache: No dedicated DRAM
Write Acceleration: SLC caching
Thermal Design: Graphene heat-dissipating SSD label
Data Integrity: LDPC error correction
Storage Management: TRIM and S.M.A.R.T. support
Operating Voltage: DC 3.3V
Operating Temperature: 0°C to 70°C
Dimensions: 80 x 22 x 2.25mm
Approximate Weight: 7g
MTBF: 1,500,000 hours (manufacturer-rated statistical figure)
Manufacturer Warranty: 5-year limited warranty, subject to applicable endurance limits and terms

How to Install the TEAMGROUP MP44L M.2 NVMe SSD

Installation requires a compatible desktop motherboard or laptop with an M.2 2280 PCIe NVMe connection.

Check compatibility: Confirm that your computer supports an M.2 2280 PCIe NVMe SSD.
Back up important files: Create a separate backup before replacing an existing system drive.
Switch off the computer: Shut down the system, disconnect external power and follow the manufacturer's servicing instructions.
Locate the M.2 slot: Refer to your motherboard or laptop manual to identify the correct NVMe connection.
Insert the SSD: Carefully align the connector and insert the MP44L into the supported M.2 slot.
Secure the drive: Use the appropriate mounting screw or retention mechanism supplied with the motherboard or computer.
Reinstall cooling components: If your motherboard uses an M.2 heatsink, follow its thermal pad and installation instructions.
Check BIOS detection: Restart the computer and confirm that the SSD is recognised.
Prepare the storage: Initialise and format the drive if it is being used as secondary storage, or install or migrate the operating system if it will serve as the main system drive.

Important installation note: Formatting a drive removes existing data. If replacing your Windows system drive, ensure that your operating system has been correctly cloned or installed and that your important files are backed up.

Important Performance, Compatibility and Warranty Notes

Maximum Performance Is Not Guaranteed

Advertised read and write speeds are maximum manufacturer-rated benchmark results. Actual performance varies depending on PCIe generation, CPU, motherboard, workload, cache availability, operating temperature and remaining SSD capacity.

Check the SSD Form Factor and Interface

The TEAMGROUP MP44L requires an appropriate M.2 PCIe NVMe slot. It is not a conventional SATA SSD and cannot be connected directly to a standard 2.5-inch SATA drive bay.

Maintain Backups of Important Data

Although SSDs contain no moving mechanical parts and incorporate storage-management technologies, all storage devices can fail. Maintain independent backups of valuable documents, photographs and personal files.

Manufacturer Warranty Conditions

TEAMGROUP provides a five-year limited warranty for the MP44L series. Warranty coverage is subject to manufacturer terms, including the applicable total bytes written (TBW) endurance limit, whichever condition is reached first.

TEAMGROUP's current published endurance specification for the 500GB model is 160TBW. Manufacturer specifications may change, so confirm the applicable product revision and warranty terms for the supplied drive.

Why Choose the TEAMGROUP MP44L 500GB PCIe 4.0 NVMe SSD?

The TEAMGROUP MP44L 500GB M.2 2280 PCIe Gen4 NVMe SSD offers a combination of fast sequential storage performance, compact construction and practical reliability features for compatible desktop PCs and laptops.

With up to 5,000MB/s read speeds, 2,500MB/s write speeds, SLC caching, LDPC error correction, a graphene heat-dissipating label and a five-year limited warranty, it provides a useful storage solution for Windows installations, PC gaming, home computing and everyday productivity.

Its M.2 2280 format is particularly convenient for users who want fast internal storage without traditional SATA cables or drive bays, while its slim thermal design helps accommodate compatible compact installations.

Choose the TEAMGROUP MP44L 500GB if your computer supports M.2 PCIe NVMe storage and you want a practical PCIe Gen4 SSD for faster system responsiveness, applications, gaming and everyday file access.

Explore more internal SSD drives at Memox to compare capacities, performance and compatible storage interfaces.

Manufacturer reference: TEAMGROUP MP44L 500GB official product specifications.

Specification

TEAMGROUP MP44L 500GB M.2 NVMe PCIe 4.0 SSD – Technical Specifications

The TEAMGROUP MP44L 500GB (TM8FPK500G0C101) is an internal M.2 2280 PCIe Gen4 x4 NVMe solid state drive designed for compatible desktop PCs and laptops. It delivers sequential read speeds up to 5,000MB/s, write speeds up to 2,500MB/s and features an ultra-thin graphene heat-dissipating label, SLC caching, LDPC error correction and a five-year limited manufacturer warranty.

General Information

Brand	TEAMGROUP
Manufacturer	TEAMGROUP Inc.
Product Series	MP44L
Product Name	TEAMGROUP MP44L 500GB M.2 PCIe Gen4 NVMe SSD
Manufacturer Part Number	TM8FPK500G0C101
Memox SKU	SSD-500TEMP44LP
UPC	765441062054
Product Type	Internal solid state drive (SSD)
Storage Capacity	500GB
Drive Form Factor	M.2 2280
Connection Interface	PCI Express 4.0 x4 NVMe
Recommended Use	Desktop and laptop storage upgrades, operating systems, applications, gaming and general file storage

Storage and Interface Specifications

Storage Technology	Solid State Drive (SSD)
Storage Capacity	500GB
Manufacturer Capacity Measurement	500,000,000,000 bytes (decimal)
Form Factor	M.2 2280
SSD Interface	PCIe Gen4 x4
Storage Protocol	NVMe (Non-Volatile Memory Express)
PCIe Lane Configuration	4 lanes (x4)
PCIe Generation	PCIe 4.0
Drive Connector Type	M.2 PCIe NVMe
SATA Interface	No – PCIe NVMe SSD
Internal Installation	Compatible motherboard or laptop M.2 NVMe slot
Separate SATA Cable Required	No
Separate SATA Power Cable Required	No

Sequential and Random Performance

Maximum Sequential Read Speed	Up to 5,000MB/s
Maximum Sequential Write Speed	Up to 2,500MB/s
Maximum Random Read Performance	Up to 440,000 IOPS
Maximum Random Write Performance	Up to 545,000 IOPS
Manufacturer Benchmark Reference	CrystalDiskMark
Write Acceleration	SLC caching technology
Dedicated DRAM Cache	No
Performance Standard	Manufacturer-rated maximum performance under benchmark conditions

Performance Note: Advertised read and write speeds represent maximum manufacturer-rated results. Actual performance depends on the CPU, motherboard, PCIe interface, file size, workload, SSD temperature and available free capacity. Sustained write speeds may decrease when the SLC cache is exhausted.

NAND, Cache and Storage Management

Storage Memory	NAND flash memory
DRAM Cache	No dedicated DRAM
Caching Technology	SLC Cache
Error Correction	LDPC (Low-Density Parity-Check) error correction
TRIM Support	Yes, with compatible operating systems
S.M.A.R.T. Support	Yes
SSD Monitoring Software	TEAMGROUP S.M.A.R.T. monitoring software
NVMe Technologies	Supports NVM Sets, Predictable Latency Mode (PLM) and Read Recovery Level (RRL) features as described by TEAMGROUP
Specific NAND Flash Type	Not confirmed in TEAMGROUP's current published specification
SSD Controller Model	Not specified by TEAMGROUP for this product listing

Endurance and Reliability

Manufacturer Endurance Rating	160TBW (Terabytes Written)
Endurance Standard	TBW calculated in accordance with JEDEC standards
Mean Time Between Failures (MTBF)	1,500,000 hours
Data Error Correction	LDPC error correction
Drive Health Monitoring	S.M.A.R.T. technology
SSD Optimisation	TRIM support
Physical Storage Design	Solid state storage without mechanical moving parts
Manufacturer Warranty	5-year limited warranty, subject to warranty conditions and applicable TBW limit

Endurance Note: TEAMGROUP currently specifies 160TBW for the MP44L 500GB. This figure represents the manufacturer's rated cumulative write endurance; it is not the amount of data the drive can store at one time. Warranty coverage is subject to the five-year period or specified TBW limit, whichever is reached first.

Graphene Thermal Management

Thermal Technology	Heat-dissipating graphene SSD label
Thermal Label Construction	Conductive graphene coating on aluminium foil
Thermal Design	Ultra-thin low-profile label
Cooling Purpose	Helps spread heat generated during SSD operation
Motherboard M.2 Heatsink Compatibility	Can be used with suitable motherboard M.2 heatsinks, subject to installation and clearance requirements
Large Metal Heatsink Included	No – the drive features an integrated graphene heat-dissipating label
Operating Temperature Range	0°C to 70°C

Cooling Note: The graphene label is designed to assist heat dissipation while maintaining a slim M.2 profile. It does not guarantee the same cooling performance as a dedicated metal heatsink. Temperature depends on airflow, installed components and workload.

Physical Specifications

SSD Form Factor	M.2 2280
Drive Length	80mm
Drive Width	22mm
Drive Height	2.25mm
Dimensions (L x W x H)	80 x 22 x 2.25mm
Approximate Weight	7g
Product Construction	M.2 SSD module with graphene heat-dissipating label
Drive Installation Format	Internal M.2 motherboard or laptop connection

Power and Environmental Specifications

Operating Voltage	DC 3.3V
Power Supply Connection	Powered through a compatible M.2 slot
Separate External Power Adapter	Not required
Operating Temperature	0°C to 70°C
Storage Temperature	-40°C to 85°C
Operating Humidity	Up to 90% relative humidity under 40°C
Vibration Resistance	80Hz to 2,000Hz / 20G
Shock Resistance	1,500G / 0.5ms
Cooling Feature	Graphene heat-dissipating label

Environmental Note: The specified temperature, vibration and shock figures reflect manufacturer testing conditions. They should not be interpreted as protection against every environmental hazard or as permission to expose the SSD to excessive moisture, impact or heat.

Desktop and Laptop Compatibility

Compatible Computer Types	Desktop PCs and laptops supporting M.2 2280 PCIe NVMe storage
Supported CPU Platforms	Compatible Intel and AMD platforms
Required Slot	M.2 PCIe NVMe slot supporting 2280-length SSDs
PCIe 4.0 Compatibility	Yes, with supported PCIe Gen4 NVMe connections
PCIe 3.0 Compatibility	Generally supported with backwards-compatible PCIe Gen3 NVMe slots; speeds limited by the host connection
PCIe 5.0 Compatibility	Generally compatible with backwards-compatible PCIe Gen5 NVMe slots; the SSD operates at PCIe Gen4 capability
M.2 SATA-Only Slot Compatibility	No
2.5-Inch SATA Bay Compatibility	No direct compatibility
M.2 2230-Only Devices	Not suitable without explicit 2280 support
M.2 2242-Only Devices	Not suitable without explicit 2280 support
BIOS / UEFI Compatibility	Host firmware must support the installed PCIe NVMe SSD
Operating System Boot Drive	Supported where the computer BIOS/UEFI provides compatible NVMe boot functionality

Important Compatibility Note: The TEAMGROUP MP44L 500GB is a PCIe NVMe SSD, not an M.2 SATA drive. The computer must have an appropriate M.2 2280 NVMe connection. Check the motherboard or laptop manufacturer's specifications and BIOS compatibility information before purchase.

Operating System Support

Windows 11	Supported on compatible hardware
Windows 10	Manufacturer-listed compatibility
Older Windows Systems	Windows 8, 7 and Vista listed by TEAMGROUP, subject to hardware, firmware and driver compatibility
Linux Compatibility	Linux kernel 2.6.33 or later, according to TEAMGROUP
Apple Mac Compatibility	Not specifically confirmed in TEAMGROUP's published compatibility requirements; check exact Mac model and storage interface
Operating System Included	No
Formatting Requirements	May require partitioning, initialisation and formatting before use as a secondary SSD

Operating System Note: TEAMGROUP lists several older Windows versions for hardware compatibility. This does not mean those operating systems still receive security updates or are suitable for modern internet-connected use.

Gaming and Console Compatibility

PC Gaming	Suitable for compatible desktop and laptop gaming systems
Game Storage	Can store supported PC games and game launchers
PlayStation 5 Interface Requirements	PCIe Gen4 x4 and M.2 2280 meet the relevant interface and form-factor categories
PlayStation 5 Recommended Read Speed	Sony recommends at least 5,500MB/s sequential read performance
MP44L 500GB Read Speed	Up to 5,000MB/s, below Sony's recommended figure
PS5 Cooling Requirement	Requires a suitable heat-dissipation solution meeting Sony's physical requirements
PS5 Purchase Recommendation	Choose an SSD meeting Sony's recommended speed and cooling requirements instead

Package Contents

SSD Included	1 x TEAMGROUP MP44L 500GB M.2 PCIe 4.0 NVMe SSD
SSD Quantity	1
Graphene Heat-Dissipating Label	Integrated on the SSD
Mounting Screw	Not confirmed as included; check motherboard or laptop hardware
Separate Metal Heatsink	Not listed as included
Operating System	Not included
SATA Cable	Not required

Warranty and Manufacturer Information

Manufacturer	TEAMGROUP Inc.
Product Series	MP44L
Manufacturer Part Number	TM8FPK500G0C101
Manufacturer Warranty	5-year limited warranty
Applicable Endurance Limit	160TBW
Warranty Limitation	Warranty period or applicable TBW limit, whichever is reached first
Warranty Terms	Subject to TEAMGROUP's applicable warranty conditions and exclusions

Important Installation Notes

Check Compatibility: Confirm that the computer supports M.2 2280 PCIe NVMe storage. An M.2 SATA-only slot is not compatible with this SSD.

Switch Off Power: Shut down the computer, disconnect power and follow the computer manufacturer's servicing instructions before installation.

Mounting: Install the drive using the appropriate motherboard or laptop M.2 mounting mechanism. Do not force the SSD into an incompatible connection.

Thermal Management: Follow the motherboard or laptop manufacturer's instructions when installing an M.2 heatsink or thermal pad. Do not damage or unnecessarily remove the SSD's graphene label.

Operating System Installation: A new SSD may require initialisation and formatting. If replacing the system drive, back up important files and complete the required operating system installation or migration procedure.

Important Performance and Data Protection Notes

Performance: Sequential transfer speeds and random IOPS are maximum manufacturer-rated benchmark figures. Performance can vary with system hardware, SSD temperature, available cache, free capacity and workload.

Endurance: The current manufacturer-rated write endurance for the 500GB MP44L model is 160TBW. The endurance rating should not be confused with the available 500GB storage capacity.

Data Protection: S.M.A.R.T. monitoring, TRIM and LDPC error correction support SSD management and reliability but cannot guarantee that data loss will never occur. Maintain regular independent backups of important files.

Official TEAMGROUP Technical Specifications

For updated performance specifications, compatibility information, monitoring software and warranty terms, please refer to the TEAMGROUP MP44L 500GB official product specifications.

Technical specifications are based on TEAMGROUP's published information for model TM8FPK500G0C101. Product specifications, component revisions and warranty conditions are subject to manufacturer updates.

Return

30 Days Return

FAQ: Frequenlty Asked Questions

TEAMGROUP MP44L 500GB NVMe SSD FAQ

The TEAMGROUP MP44L 500GB (TM8FPK500G0C101) is an M.2 2280 PCIe 4.0 x4 NVMe SSD designed for compatible desktop PCs and laptops. TEAMGROUP's current specification rates the 500GB model for up to 5,000MB/s sequential read and 2,500MB/s sequential write performance, with a graphene heat-dissipating label, SLC caching, LDPC error correction, S.M.A.R.T. monitoring and a five-year limited warranty.

Below are answers to the most common questions about TEAMGROUP MP44L 500GB compatibility, PCIe Gen4 vs Gen3, M.2 2280 installation, DRAM and HMB, controller and NAND revisions, graphene cooling, gaming, Windows 11, laptops, PS5 compatibility, SSD temperatures, SLC cache, endurance, 160TBW vs older 300TBW listings, cloning, BIOS detection, S.M.A.R.T. health monitoring and MP44L vs MP44 / SATA SSDs.

1. What is the TEAMGROUP MP44L 500GB?

The TEAMGROUP MP44L 500GB is an internal M.2 2280 PCIe 4.0 x4 NVMe SSD for compatible desktops and laptops. TEAMGROUP currently rates the 500GB model for up to 5,000MB/s sequential read and 2,500MB/s sequential write performance.

2. What is the exact model number and UPC?

The exact part number is TM8FPK500G0C101. The commonly published UPC/GTIN is 0765441062054, also shown without the leading zero as 765441062054.

3. How much usable space does a 500GB MP44L provide?

The drive is sold as 500GB. Windows normally shows roughly 465GB because manufacturers use decimal gigabytes while operating systems may display binary capacity, with a small additional amount used by formatting.

4. What form factor and dimensions does the MP44L use?

It is an M.2 2280 SSD measuring approximately 80 x 22 x 2.25mm and weighing about 7g.

5. What interface does the MP44L 500GB use?

It uses PCIe Gen4 x4 through an M.2 NVMe connection.

6. Is the MP44L NVMe or SATA?

It is an NVMe PCIe SSD, not an M.2 SATA SSD. The computer needs an M.2 slot that supports PCIe/NVMe storage.

7. What are the current official read and write speeds?

TEAMGROUP currently specifies up to 5,000MB/s sequential read and 2,500MB/s sequential write for the 500GB model.

8. Why do some older listings show 3,700MB/s write speed?

Older reviews and distributor feeds published a 3,700MB/s write figure for the 500GB MP44L. TEAMGROUP's current page for TM8FPK500G0C101 lists 2,500MB/s, so the current manufacturer figure is the safer specification for new stock.

9. What random IOPS performance is specified?

TEAMGROUP currently lists up to approximately 440,000 random read IOPS and 545,000 random write IOPS for the 500GB capacity.

10. Why might my MP44L benchmark below 5,000MB/s?

Check that the drive is installed in a PCIe 4.0 x4 NVMe slot. PCIe generation, lane width, CPU, BIOS settings, temperature, free space, SLC-cache state and background tasks can all affect benchmark results.

11. Will the MP44L work in a PCIe 3.0 M.2 slot?

Generally yes if the slot supports PCIe NVMe and M.2 2280. The drive will operate at the lower Gen3 bandwidth and will not reach its full Gen4 speed.

12. Will the MP44L work in a PCIe 5.0 M.2 slot?

Yes in a backward-compatible PCIe 5.0 NVMe slot. The SSD will still operate at its own PCIe Gen4 capability.

13. Will the MP44L work in any M.2 slot?

No. M.2 slots can support SATA, PCIe/NVMe or both. The MP44L requires a PCIe/NVMe-capable slot that supports the 2280 length.

14. Can I use the MP44L in both desktop PCs and laptops?

Yes, provided the system has a compatible M.2 2280 PCIe NVMe slot. Check laptop service documentation because some devices support only shorter M.2 sizes or SATA M.2 drives.

15. Does the MP44L 500GB have dedicated DRAM?

No. TEAMGROUP's current specification explicitly lists no dedicated DRAM cache.

16. Does the MP44L use HMB or Host Memory Buffer?

Earlier MP44L reviews identified HMB on tested DRAM-less revisions. TEAMGROUP's current 500GB specification guarantees no dedicated DRAM but does not explicitly guarantee a particular HMB implementation for every hardware revision.

17. What controller does the MP44L 500GB use?

TEAMGROUP's current official page does not guarantee a specific controller. Early reviewed units used the Phison E21T, while later community databases have documented other controller revisions.

18. Does the MP44L use TLC or QLC NAND?

TEAMGROUP's current 500GB specification does not guarantee a NAND type. Earlier reviewed samples were identified as TLC, but internal components can change between production revisions, so TLC should not be promised for every unit without verification.

19. Why do different MP44L reviews show different internal hardware?

SSD manufacturers can revise controllers or NAND while keeping the same retail model if the product continues to meet the published performance and warranty targets. This explains why different MP44L teardowns can show different components.

20. What is the graphene heat-dissipating label?

TEAMGROUP uses a conductive graphene coating on an ultra-thin aluminium-foil label to help spread heat while keeping the SSD slim enough for compatible laptops and motherboard M.2 heatsinks.

21. Does the MP44L need a separate heatsink?

Not necessarily for normal PC use. The drive has its graphene heat-spreading label, but a correctly fitted motherboard M.2 heatsink can further help during sustained workloads.

22. Should I remove the graphene label before fitting a motherboard heatsink?

No. Do not unnecessarily remove the factory label. TEAMGROUP designed the graphene label to work with suitable motherboard M.2 cooling; follow the motherboard manufacturer's thermal-pad instructions.

23. What is the operating temperature range?

TEAMGROUP specifies 0°C to 70°C for operation and -40°C to 85°C for storage.

24. What is SLC caching and why does the MP44L use it?

SLC caching temporarily operates part of the NAND in a faster mode to improve burst write performance. It helps everyday responsiveness and short transfers.

25. Why can write speed fall during a very large file transfer?

The 2,500MB/s figure is a maximum benchmark result, not unlimited sustained-write speed. Once SLC cache is exhausted, or when the drive is hot or nearly full, write performance can decrease.

26. Does the MP44L support TRIM?

Yes. TEAMGROUP lists Windows TRIM optimisation support, which helps the SSD efficiently prepare unused flash blocks for future writes.

27. Does the MP44L support LDPC error correction?

Yes. TEAMGROUP lists Low-Density Parity-Check error correction to help detect and correct NAND data errors.

28. Does the MP44L support S.M.A.R.T. monitoring?

Yes. TEAMGROUP supports S.M.A.R.T. drive-health monitoring and provides an official SSD S.M.A.R.T. TOOL through its support download centre.

29. What is the MTBF rating?

TEAMGROUP specifies approximately 1,500,000 hours MTBF. MTBF is a statistical population measure and does not predict the lifespan of an individual SSD.

30. What is the current endurance rating of the MP44L 500GB?

TEAMGROUP's current specification lists the 500GB MP44L at 160TBW.

31. Why do older MP44L 500GB listings show 300TBW?

Earlier TEAMGROUP documents, reviews and distributor feeds showed 300TBW. TEAMGROUP's current product page and current specification sheet list 160TBW, so 160TBW should be used for current product-page content unless a supplied revision is documented differently.

32. What does 160TBW mean?

160TBW means 160 terabytes written. It is the manufacturer's cumulative write-endurance limit used as part of warranty conditions, not the amount of data the SSD can store at one time.

33. What warranty does the TEAMGROUP MP44L have?

TEAMGROUP provides a five-year limited warranty. Coverage is subject to the warranty period or the applicable TBW limit, whichever comes first, together with TEAMGROUP's other warranty conditions.

34. Is the MP44L a good Windows 11 boot drive?

Yes. Its NVMe performance makes it suitable for Windows 11, applications and everyday files in a compatible system.

35. Does Windows 11 need a special driver for the MP44L?

Normally no. Windows 10 and Windows 11 include native NVMe support, so a separate storage driver is not normally required for basic operation.

36. Does the MP44L work with Linux?

Yes. TEAMGROUP lists Linux kernel 2.6.33 or later among the supported operating systems, subject to compatible hardware.

37. Can the MP44L be used in a Mac?

TEAMGROUP's current MP44L page does not list macOS. It may work through a compatible NVMe enclosure or in hardware that truly accepts a standard M.2 2280 NVMe SSD, but most modern Macs do not offer a user-replaceable standard M.2 internal slot.

38. Is the MP44L good for PC gaming?

Yes. Its PCIe 4.0 NVMe performance is more than sufficient for normal PC game storage, fast loading and general gaming use.

39. Will the MP44L increase gaming FPS?

Usually not. An SSD mainly improves boot time, loading, installation and asset access. Average frame rate is normally determined more by the CPU and GPU.

40. Is 500GB enough for gaming?

It can hold Windows plus several games, but many modern AAA titles exceed 100GB each. A 1TB or 2TB drive is usually more convenient for a large game library.

41. Does the MP44L support Microsoft DirectStorage?

It is an NVMe SSD and can be used in a DirectStorage-capable Windows system when the operating system, GPU, game and other platform requirements are met.

42. Is the MP44L suitable for photo and video editing?

Yes for general photo work and light-to-moderate video editing. Heavy professional workflows with large sustained writes may benefit from a higher-end SSD with stronger sustained performance and higher endurance.

43. Is the MP44L suitable for heavy workstation use?

It can work, but it is a value-oriented client SSD. Very write-heavy professional workloads, databases and intensive scratch-disk use may be better served by a higher-end or enterprise-class drive.

44. Can I use the MP44L in a NAS or server?

Only if the NAS or server explicitly supports consumer M.2 NVMe drives. The MP44L does not offer enterprise-class power-loss protection or server-focused workload validation.

45. Can I use the MP44L in NVMe RAID?

Potentially yes if the motherboard, CPU and RAID implementation support NVMe RAID. Check motherboard lane-sharing rules because multiple M.2 drives can disable or reduce other ports on some systems.

46. Can I install the MP44L 500GB in a PlayStation 5?

The drive matches the PS5's PCIe Gen4 x4, M.2 2280 and capacity categories, but its rated read speed is up to 5,000MB/s, below Sony's recommended 5,500MB/s. Sony also requires effective heat dissipation, so a faster PS5-focused SSD is the better new purchase.

47. Why is the MP44L not an ideal PS5 SSD?

Sony recommends 5,500MB/s or faster sequential read performance, while the MP44L 500GB is rated at up to 5,000MB/s. Sony also requires an appropriate cooling solution and does not allocate host memory to HMB-supported M.2 devices.

48. Can the MP44L be used as Xbox Series X or Series S expansion storage?

Not as the console's native high-speed expansion device. Xbox Series X and Series S use supported expansion-card solutions for games that require the console's internal storage architecture.

49. Will the MP44L fit inside a Steam Deck?

Not as a standard internal replacement. Steam Deck internal storage uses the shorter M.2 2230 form factor, while the MP44L is M.2 2280.

50. Can I use the MP44L in an external USB NVMe enclosure?

Yes, provided the enclosure supports M.2 2280 PCIe NVMe SSDs. A SATA-only M.2 enclosure will not work.

51. Will the MP44L reach 5,000MB/s in a USB enclosure?

Usually not. USB interface limits and protocol overhead are normally much lower than native PCIe 4.0 x4 bandwidth. A 10Gbps USB enclosure cannot deliver the SSD's full internal-interface performance.

52. How do I install the MP44L in a PC?

Power the computer off, locate a compatible M.2 2280 NVMe slot, insert the drive at a slight angle, press it down and secure it with the board's screw or tool-less latch. Refit any M.2 heatsink according to the motherboard manual.

53. Is an M.2 mounting screw included with the SSD?

TEAMGROUP does not list a mounting screw as part of the standard SSD specification. The screw or tool-less retention mechanism is normally supplied with the motherboard, laptop or enclosure.

54. Why is my new MP44L not showing in Windows File Explorer?

If BIOS and Windows detect the SSD but File Explorer does not, the drive may be uninitialised. Use Windows Disk Management to initialise it, create a volume, format it and assign a drive letter.

55. Should I initialise the MP44L as GPT or MBR?

GPT is the normal choice for modern UEFI Windows systems and is recommended for most new installations. MBR is mainly for legacy compatibility.

56. Why does BIOS not detect my MP44L?

Check that the slot supports PCIe NVMe rather than SATA only, reseat the drive, verify the M.2 slot is enabled, review lane-sharing rules and update the motherboard BIOS if appropriate.

57. Can installing the MP44L disable SATA ports or PCIe slots?

On some motherboards, yes. M.2 sockets can share chipset or CPU resources with SATA ports and PCIe slots, so check the motherboard manual's lane-sharing table.

58. Can I clone Windows from my old SSD to the MP44L?

Yes. Use reputable cloning software, make sure the used data fits on the new drive and back up important files first. After cloning, verify that the correct Windows Boot Manager remains first in BIOS.

59. Why did my PC stop booting after adding the MP44L as a second SSD?

The BIOS may have changed boot priority. Enter UEFI/BIOS and make sure the original Windows Boot Manager or intended system drive remains first.

60. Does the MP44L need firmware updates?

Only install firmware that TEAMGROUP specifically publishes for the exact drive or hardware revision. Do not flash firmware intended for another SSD simply because the product family name is similar.

61. What should I do if the MP44L disappears from Windows or BIOS?

Power the system down, reseat the SSD, check temperatures, try another compatible slot if available, update BIOS where appropriate and test the SSD in another system or enclosure. Back up data immediately if an intermittent drive becomes accessible again.

62. Why does Task Manager show 100% disk usage at low MB/s?

100% active time measures how long the drive is busy, not just transfer bandwidth. Paging, antivirus scans, filesystem issues, low free space, heavy small-file I/O, thermal problems or drive errors can cause high active time at modest MB/s.

63. Can low free space slow the MP44L down?

Yes. SSDs need spare capacity for caching, garbage collection and wear levelling. Keeping reasonable free space can help maintain more consistent write performance.

64. Should I defragment the MP44L?

No traditional hard-drive defragmentation is required. Modern Windows versions use SSD-aware optimisation such as TRIM.

65. How should I benchmark the MP44L 500GB?

Use a recognised SSD benchmark such as CrystalDiskMark with minimal background activity, adequate free space and a PCIe 4.0 x4 NVMe slot. Compare results with the current 500GB specification, not the faster 1TB model or older reviews.

66. How can I check the MP44L's health and TBW?

Use TEAMGROUP's official SSD S.M.A.R.T. TOOL or reputable NVMe SMART software to monitor health, temperature and written-data statistics. TEAMGROUP says its own SMART Tool is the reference for warranty TBW if software values differ.

67. TEAMGROUP MP44L 500GB vs MP44 512GB – which should I choose?

Choose the MP44L 500GB for a value-focused Gen4 drive rated up to 5,000/2,500MB/s with 160TBW. The current MP44 512GB is faster at up to 6,700/4,400MB/s and has 250TBW endurance. Both currently carry five-year limited warranties.

68. TEAMGROUP MP44L 500GB vs MP44L 1TB – which should I choose?

The 500GB model is cheaper, but the current 1TB MP44L provides twice the capacity, up to 5,000/4,500MB/s and 320TBW, versus 5,000/2,500MB/s and 160TBW for the 500GB model.

69. TEAMGROUP MP44L vs a SATA SSD – which is better?

The MP44L offers much higher sequential bandwidth and needs no SATA data or power cables, but it requires an NVMe-capable M.2 slot. A 2.5-inch SATA SSD is useful for older systems without NVMe support or when M.2 slots are already occupied.

70. Who is the TEAMGROUP MP44L 500GB NOT suitable for?

It is not the best choice for SATA-only M.2 systems, devices requiring 2230 or 2242 drives, heavy enterprise workloads, users who specifically need dedicated DRAM or enterprise power-loss protection, or buyers wanting a PS5 SSD that fully meets Sony's 5,500MB/s recommendation.

71. What is included with the TEAMGROUP MP44L 500GB?

The product is one TEAMGROUP MP44L 500GB M.2 2280 PCIe 4.0 NVMe SSD with its factory graphene heat-dissipating label. A separate metal heatsink, mounting screw, operating system, cloning adapter and SATA cables are not listed as included.

View AllClose

Warranty Information

5 Year Warranty