The Vida Lite 750W ATX PSU is a desktop computer power supply designed to provide power to compatible ATX PC systems. It is a fully wired 750W unit with flat black cables, a 120mm ultra-quiet fan, and the main connectors needed for many standard desktop PC builds.

Yes. This PSU is designed for desktop PCs that use a standard ATX power supply. It is suitable for many office PCs, home computers, repair builds, entry-level gaming systems, and upgrade projects where the case supports a standard ATX PSU size.

This model is rated at 750W. That gives it more headroom than many basic 400W, 500W, or 600W power supplies, making it useful for systems with multiple drives, dedicated graphics cards, and standard desktop components.

No. This listing is for the Vida Lite 750W ATX PSU with power lead not included. You will need a suitable compatible mains power cable if you do not already have one.

No. This is a fully wired PSU, which means the cables are permanently attached to the power supply. It is not semi-modular or fully modular. This is common on value-focused PSUs and helps keep the build simple and affordable.

The Vida Lite 750W PSU includes a 24-pin motherboard connector, a 4+4-pin CPU power connector, SATA power connectors, Molex power, FDD power, and a PCIe 6+2-pin connector for compatible graphics cards. Always check your motherboard, CPU, GPU, and drive connector requirements before buying.

Yes. This PSU includes 1x PCIe 6+2-pin connector. This can support many graphics cards that require a single 6-pin or 8-pin PCIe power connector, but it is not suitable for GPUs that require two or more PCIe power connectors unless your full setup is confirmed compatible by the GPU manufacturer.

It can be suitable for value-focused or entry-level gaming PCs, especially systems using a graphics card with one 6-pin or 8-pin PCIe power requirement. For high-end gaming PCs, premium GPUs, heavy overclocking, or modern graphics cards requiring multiple PCIe or 12VHPWR/12V-2x6 connectors, a higher-grade gaming PSU may be a better choice.

750W can be enough for many gaming PCs, but the answer depends on the CPU, graphics card, number of drives, fans, RGB accessories, and overall system power draw. Always check the recommended PSU wattage from your graphics card manufacturer and make sure this PSU has the correct connectors for your GPU.

It may be suitable for some systems using GPUs such as RTX 3060, RTX 4060, GTX cards, or similar graphics cards if the card only requires one compatible PCIe 6+2-pin connector and the rest of the PC power requirements are within range. Always check your exact graphics card model because connector requirements can vary by brand and version.

For higher-end GPUs, you should be careful. Although 750W may be enough for some systems, this PSU only has one PCIe 6+2-pin connector and does not include modern 12VHPWR or 12V-2x6 GPU power cabling. For RTX 4070 Super, RTX 4070 Ti, RTX 4080, RTX 4090, RX 7900 series, or similar high-end cards, a higher-spec ATX 3.0/ATX 3.1 PSU with the correct GPU connectors is usually the better option.

No. This Vida Lite 750W PSU is not listed with a 12VHPWR or 12V-2x6 connector. If your graphics card requires one of these newer GPU power connectors, choose a compatible ATX 3.0 or ATX 3.1 power supply instead.

This Vida Lite 750W model is not listed as having an 80 Plus certification. If 80 Plus Bronze, Gold, or higher efficiency is important for your build, choose a PSU model that clearly states the required 80 Plus rating.

An 80 Plus Bronze PSU has been rated to meet a specific efficiency standard under defined test conditions. This Vida Lite model is a value-focused 750W ATX PSU and is not listed with an 80 Plus rating. For basic builds and repairs, it may still be practical, but for higher efficiency, lower running costs, or gaming systems under heavier load, an 80 Plus Bronze or Gold PSU is usually a stronger choice.

The PSU uses an ultra-quiet 120mm black fan with a fluid/hydraulic bearing. This is designed to help keep the unit cool while reducing operating noise compared with smaller or basic fan designs. Actual noise can still depend on system load, case airflow, room temperature, and the age of the PSU.

A fluid or hydraulic bearing fan is designed to reduce friction inside the fan motor compared with some basic bearing types. In practical terms, it can help with smoother fan operation, lower noise, and better long-term fan reliability during normal use.

The PSU uses a standard ATX form factor and is listed with dimensions of approximately 150 x 140 x 85mm. It should fit many standard ATX, Micro-ATX, and compatible tower cases, but always check your PC case PSU clearance before buying.

It can fit many Micro-ATX cases if the case supports a standard ATX power supply. Some compact cases may require SFX or smaller PSU formats, so check your case specification before ordering.

Usually not if the PC requires an SFX, TFX, Flex ATX, proprietary Dell/HP/Lenovo PSU, or external power adapter. This is a standard ATX PSU, so it is intended for cases that support ATX power supplies.

Yes. This PSU includes a main 24-pin motherboard power connector for standard ATX-compatible motherboards. It also includes a 4+4-pin CPU power connector for compatible motherboards that need 4-pin or 8-pin CPU power.

Yes. The Vida Lite 750W PSU includes SATA power connectors for compatible SSDs, hard drives, optical drives, and other SATA-powered devices. This makes it useful for systems with multiple storage drives.

Yes. This PSU includes Molex power for older accessories, case fans, adapters, or legacy components that still use a 4-pin Molex connector. Always avoid overloading adapters and use proper connectors where possible.

Yes. This PSU is a practical option for many office PCs, home desktops, workshop repairs, and value-focused system builds where a standard ATX power supply is required and the connector layout matches the system.

Yes, it can be a good choice for a budget build where affordability, standard ATX compatibility, and basic connector support are important. For expensive gaming PCs, workstation builds, or systems with high-end GPUs, it is usually better to choose a higher-efficiency PSU with stronger certification and modern GPU connectors.

This PSU is best for buyers building or repairing a standard desktop PC, office computer, home system, or entry-level gaming PC that needs a fully wired ATX PSU with 750W output, SATA power, Molex support, and one PCIe 6+2-pin GPU connector.

This PSU is not the best choice for high-end gaming PCs, workstation PCs, heavy overclocking, premium graphics cards requiring multiple PCIe connectors, systems requiring 12VHPWR/12V-2x6, or buyers specifically looking for an 80 Plus Bronze, Gold, or ATX 3.1 certified PSU.

Choose the Vida Lite 750W if you want a low-cost, fully wired ATX PSU for a basic desktop, repair, or budget build. Choose a Vida Heracles 750W Bronze or another 80 Plus rated PSU if you want better efficiency credentials, a more gaming-focused specification, or a stronger option for a more valuable PC build.

A 500W PSU may be enough for many basic office PCs and low-power systems. The 750W model gives more headroom for systems with a dedicated graphics card, multiple drives, extra fans, or future upgrades. However, connector compatibility and PSU quality are just as important as wattage.

No. A PC only draws the power it needs. A 750W PSU does not force 750W into the system. The important points are compatibility, correct installation, stable power delivery, and making sure the PSU has the right connectors for your components.

Before buying, check that your case supports a standard ATX PSU, your motherboard uses a 24-pin and compatible CPU power connector, your graphics card only needs the available PCIe 6+2-pin connector, your system power draw is suitable, and you already have or can source the correct mains power lead because it is not included.