The DIGITUS Wall-Mounted Housing 254mm / 10-inch cabinet is a compact wall-mounted network enclosure designed to hold compatible 10-inch networking and telecoms equipment. It is commonly used for patch panels, small network switches, routers, CCTV equipment and tidy cable management in homes and small offices.

This cabinet is best used for compact network installations, home networks, small office cabling, CCTV network equipment, patch panels, small switches, fibre equipment, broadband accessories and sub-distribution points where a full 19-inch rack would be too large.

This is a 10-inch network cabinet, also described as 254mm. It is smaller than a standard 19-inch rack and is designed for compatible 10-inch rack accessories rather than full-size 19-inch rack equipment.

254mm is the metric equivalent commonly used for 10-inch rack equipment. It refers to the 10-inch rack format used by the internal mounting rails and compatible accessories.

312 x 300mm refers to the cabinet width and depth. The cabinet is approximately 312mm wide and 300mm deep, making it compact enough for small network rooms, cupboards, offices, utility rooms and home installations.

The DIGITUS 10-inch wall-mounted housing range is available in different rack heights, including 6U, 9U and 12U versions. Check the exact product model on the page before ordering to confirm the height in rack units.

U stands for rack unit. One rack unit is a standard height measurement used for rack equipment. A 6U cabinet has space for six rack units, while 9U and 12U versions provide more vertical space for additional equipment.

Yes. This DIGITUS 10-inch wall cabinet is well suited to home networking because it is compact, wall mountable and suitable for organising patch panels, switches, cables and broadband equipment in one tidy location.

Yes. It is suitable for small offices that need a compact wall-mounted cabinet for structured cabling, a small switch, patch panel, router, fibre equipment or telecoms hardware without installing a large 19-inch rack.

Yes. It can be used for CCTV network accessories such as a small PoE switch, patch panel, cables and network devices. Always check the size and heat output of your NVR or switch before placing it inside the cabinet.

No. A standard 19-inch patch panel is too wide for a 10-inch cabinet. You need a compatible 10-inch patch panel or other 10-inch rack accessory designed for this smaller cabinet format.

Yes. The cabinet is designed for compatible 10-inch rack accessories, including 10-inch patch panels. Check the patch panel depth and rack height to make sure it fits the available space inside the cabinet.

Yes, if the switch is small enough for the cabinet width and depth. Many compact 5-port, 8-port and some 10-inch rackmount switches may fit, but full-size 19-inch switches will not fit unless they are very small and shelf-mounted.

The DIGITUS datasheet lists the maximum component installation depth as approximately 240mm. This means equipment deeper than 240mm may not fit correctly, especially once cables are connected at the front or rear.

It depends on the switch. Many compact switches will fit, but deeper rackmount switches may not. Check the switch depth and allow extra space for power cables, Ethernet cables and airflow before buying.

Yes, many small routers can be placed inside the cabinet using a shelf or suitable mounting method. However, WiFi routers may perform worse inside a metal cabinet, so it is often better to keep wireless access points outside the cabinet.

Yes, WiFi signal can be reduced by the metal cabinet enclosure. If the device provides WiFi, consider placing it outside the cabinet or using separate wireless access points in better locations around the property.

Yes, it can be used to organise a fibre ONT, modem or broadband equipment if the device fits and has enough ventilation. Check cable entry, power access and service provider requirements before installing broadband equipment inside the cabinet.

Yes. The DIGITUS 10-inch wall-mounted housing is listed with a lockable safety glass door. This helps protect network equipment from accidental access while still allowing visibility of the equipment inside.

Yes. The cabinet includes a safety glass front door. This makes it easier to see equipment status lights without opening the cabinet.

The DIGITUS specification lists a 200° door opening angle. This gives wide access to the equipment inside, which can help during installation, cabling and maintenance.

Yes. DIGITUS product information states that the door hinges can be changed. This is useful if the cabinet is installed in a tight space where the door needs to open in a particular direction.

Yes. The cabinet is listed with cable entry in the roof and base. The top cable entry uses a brush strip and the lower cable entry uses a plastic cover, helping keep cables organised while reducing dust entry.

Yes. The cabinet supports cable entry from both the roof and the base. This gives flexibility for wall-mounted installations where cables may come from above, below or inside trunking.

Yes. The cabinet includes ventilation slots for passive ventilation and can support airflow around compatible equipment. For heat-generating devices such as PoE switches, always check temperature and airflow requirements.

Active cooling is not always needed for low-power equipment, but it may be useful if you install heat-generating devices such as PoE switches, multiple network devices or equipment running in a warm cupboard. Check equipment temperatures after installation.

Yes, if the PoE switch fits and has enough ventilation. PoE switches can generate more heat than basic switches, especially when powering cameras or access points, so avoid overcrowding and monitor temperature.

Yes. The compact 10-inch size makes it suitable for comms cupboards, utility rooms, small offices and home network points where a full 19-inch cabinet would take up too much space.

Yes. This is a wall-mounted cabinet designed to be fixed to a suitable wall. Make sure the wall and fixings can safely support the cabinet, equipment and cables.

The DIGITUS datasheet lists a load capacity of 30kg. The actual safe installation also depends on the wall type, fixings, installation quality and how the equipment weight is distributed inside the cabinet.

It may be possible only with the correct heavy-duty fixings and support, but plasterboard alone may not be suitable for a loaded network cabinet. For safety, fix into solid masonry, timber studs or a properly reinforced mounting surface.

The cabinet is made from robust sheet steel, with product information listing steel thickness up to approximately 1.5mm depending on the cabinet section. It is powder-coated for a durable finish.

The DIGITUS 10-inch wall-mounted housing range is available in colours such as black RAL 9005 and grey RAL 7035, depending on the exact model. Check your product page model and images to confirm the colour before ordering.

IP20 means the cabinet offers basic protection against solid objects larger than 12.5mm, but it is not waterproof. It is intended for indoor environments, not outdoor or wet areas.

No. This cabinet is IP20 rated and designed for indoor use. It should not be installed outdoors, in damp areas or anywhere exposed to rain, water spray or high moisture.

It can be used in a dry indoor garage if the environment is clean, dry and within safe equipment temperatures. Avoid damp garages, condensation, dust-heavy areas or locations where the cabinet could be exposed to water.

DIGITUS product data lists the cabinet as mounted, and the range is also described as demountable if required. Package condition can vary by supplier, so check the product listing or packaging details before installation.

Yes. DIGITUS information states that the wall-mounted enclosures can be completely dismantled if required thanks to their demountable design. This can help with installation or access in tight spaces.

Yes. The cabinet includes galvanized 10-inch profile rails that are adjustable in depth. This helps position equipment correctly depending on device depth and cable space.

Yes. The DIGITUS cabinet includes a pair of 254mm / 10-inch profile rails mounted inside the enclosure. These rails are used for installing compatible 10-inch rack accessories.

Yes, if you use a compatible 10-inch rack shelf that fits the cabinet depth. A shelf can be useful for non-rackmount devices such as small routers, ONTs, mini PCs or compact power supplies.

Yes, if the power strip or PDU fits safely and does not block airflow or cable access. Use suitable electrical equipment and avoid overloading sockets. For fixed electrical work, use a qualified electrician.

It may be suitable only for very compact devices that fit the available space and cooling limits. Many NAS units and mini servers are deeper than expected and may generate heat, so measure carefully before installing them inside a 300mm deep cabinet.

Yes. The cabinet helps organise patch cables, Ethernet cables, switches and small network devices in one enclosed location. This can make home and office networks look cleaner and easier to maintain.

A 10-inch cabinet is better when space is limited and you only need compact networking equipment. A 19-inch cabinet is better if you need full-size switches, larger patch panels, rack servers, UPS units or more expansion room.

Choose 6U for very small networks, 9U for more equipment and spare space, or 12U if you expect future expansion. It is usually better to allow extra rack units for cable management, airflow and future devices.

Check whether your equipment is 10-inch compatible, the cabinet height in U, the 240mm maximum installation depth, wall strength, ventilation needs, cable entry direction, switch depth, power access and whether you need shelves or patch panels.

The most common mistake is buying a 10-inch cabinet for 19-inch equipment. Always check the width and mounting format of your patch panel, switch, shelf or accessory before ordering.

This cabinet is not ideal for users who need full-size 19-inch rack equipment, deep switches, rack servers, large UPS units, outdoor installation, waterproof protection or heavy equipment above the safe load limit. It is best for compact indoor networking and telecoms installations.

Buying the DIGITUS Wall-Mounted Housing 254mm / 10-inch 312 x 300mm from Memox is a practical choice if you want a compact wall-mounted network cabinet for home networking, small office cabling, patch panels, switches, CCTV accessories and tidy cable management. Memox offers networking products, cabinets, switches, cables, storage, PC components and computer accessories for UK customers.